Coatings Canada - Coating types

Mylar High Gloss Film Lamination

Description
The same qualities and applications as O.P.P., but with added strength and durability.

Typical Coating Applications
Mylar High Gloss Film Lamination is recommended for:

book covers

brochure covers

cosmetic packaging

annual reports

menus

cartons / boxes

greeting cards

music / disk packaging

catalogue covers

placemats

pocket folders

calendars

posters

food packaging

P.O.P. materials

magazine covers

instruction sheets

labels

sales sheets

general packaging

postcards

software packaging

Design Considerations

Substrate
7 to 24 pt coated stock is recommended. 60 - 100 lb coated stocks may tear when separated and are not recommended. Curling will be evident if a lighter stock is used and coating is applied to only 1 side. For best results, coated stocks are recommended over uncoated stocks.

Complementary Processes
Mylar High Gloss can be used in conjunction with foil stamping or embossing. This coating has the added feature of glueability.

Alternative Processes
You may wish to consider UV Bond where gluing is required.

Summary of Coating Characteristics

Gloss Excellent
Abrasion Resistance Excellent
Chemical Resistance Excellent
Adhesion Very Good
Colour Fidelity Good
Glueability Yes
Environmental
Impact Recyclable No
Repulpable No
Biodegradable No

General Coating and Laminating Guidelines
Offset spray should be kept to a minimum. Low-wax, non-bleeding inks should be used. Metallic inks are not recommended. Sufficient time should be allowed for ink to dry before a coating is applied. Rhodamine red, reflex blue and purple should be avoided if possible. Your ink supplier can recommend inks, or call us for a complimentary test and recommendations. Mylar High Gloss can be applied on 1 or 2 sides.

Production Specifications

Maximum Sheet Size 40" x 40"
Minimum Sheet Size 10 1/2" x 13"
Gripper Edge 5/8"(1/4" on other 3 sides)
Minimum Paper Weight 60 lb
Maximum Board Thickness 24 pt