Mylar Matte Film Lamination
DescriptionThe same applications and toughness as Mylar High Gloss, but with a matte finish.
Typical Coating Applications
Mylar Matte Film Lamination is recommended for:
- book covers
- brochure covers
- placemats
- menus
- P.O.P. materials
- magazine covers
- annual reports
- pocket folders
- posters
- postcards
- calendars
- cosmetic packaging
- instruction sheets
- sales sheets
Design Considerations
Substrate
7 to 24 pt coated stock is recommended. 60 - 100 lb coated stocks may tear when separated and are not recommended. Curl will be evident if a lighter stock is used and coating is applied to only 1 side. For best results, coated stocks are recommended over uncoated stocks.
Complementary Processes
Mylar Matte can be Spot UV coated, however, testing is recommended first. This process can also be used in conjunction with foil stamping and embossing.
Alternative Processes
You may wish to consider O.P.P. Matte Film Lamination or LAYFLAT™ Matte for other matte coating alternatives.
Summary of Coating Characteristics
| Gloss | Matte | |
| Abrasion Resistance | Excellent | |
| Chemical Resistance | Excellent | |
| Adhesion | Very Good | |
| Colour Fidelity | Good | |
| Glueability | No | |
| Environmental Impact | Recyclable | No |
| Repulpable | No | |
| Biodegradable | No | |
General Coating and Laminating Guidelines
Offset spray should be kept to a minimum. Low-wax, non-bleeding inks should be used. Metallic inks are not recommended. Sufficient time should be given for ink to dry before applying coating. Rhodamine red, reflex blue and purple should be avoided if possible. Your ink supplier can recommend inks, or call us for a complimentary test and recommendations. Mylar Matte can be applied on 1 or 2 sides.
Production Specifications
| Maximum Sheet Size | 40" x 40" |
| Minimum Sheet Size | 10 1/2" x 13" |
| Gripper Edge | 5/8"(1/4" on other 3 sides) |
| Minimum Paper Weight | 60 lb |
| Maximum Board Thickness | 24 pt |