O.P.P. Matte Film Lamination
DescriptionA durable, smooth film with the same applications as O.P.P. High Gloss, but with a subtle matte look.
Typical Coating Applications
O.P.P. Matte Film Lamination is recommended for:
- book covers
- magazine covers
- P.O.P. materials
- placemats
- cosmetic packaging
- postcards
- posters
- menus
- pocket folders
- instruction sheets
- annual reports
- brochure covers
- sales sheets
Design Considerations
Substrate
7 to 24 pt coated stock is recommended. 60 - 100 lb coated stocks can be used, however some curling may occur. The possibility of curling will be greatly increased when coating on both sides of the sheet. For best results we recommend coated stocks over uncoated stocks.
Complementary Processes
Spot UV can be used in conjunction with treated O.P.P. Matte Film Lamination.
Alternative Processes
For alternative matte coatings, you may wish to consider LAYFLAT™ or Mylar Matte Film Lamination.
Summary of Coating Characteristics
| Gloss | Matte | |
| Abrasion Resistance | Average to poor | |
| Chemical Resistance | Excellent | |
| Adhesion | Very Good | |
| Colour Fidelity | Good | |
| Glueability | No | |
| Environmental Impact | Recyclable | No |
| Repulpable | No | |
| Biodegradable | No | |
General Coating and Laminating Guidelines
Offset spray should be kept to a minimum. Low-wax, non-bleeding inks should be used, metallic inks are not recommended. Sufficient time should be given for inks to dry before coating is applied. Rhodamine red, reflex blue and purple should be avoided if possible. Your ink supplier can recommend inks, or call us for a complimentary test and recommendations. O.P.P. Matte can be applied on 1 or 2 sides.
Production Specifications
| Maximum Sheet Size | 40" x 40" |
| Minimum Sheet Size | 10 1/2" x 13" |
| Gripper Edge | 5/8"(1/4" on other 3 sides) |
| Minimum Paper Weight | 60 lb |
| Maximum Board Thickness | 24 pt |